GAS MAX ASB1, User Manual

Page: 16 / 23

15
HOW TO
BASS BOOST (EQ)
If everything is tuned correctly and the gain has been set, the BASS BOOST should remain in
default (0dB). This function will apply level/gain at 45Hz centre frequency. Be adviced that
equiping the bass from 0-12 dB is a lot, an increase of +3dB doubles the output!
WARNING! The information below is for experienced users and bass addicts only, if you are
new to the wonderful world of low frequencies, leave the BASS BOOST in default mode or
consult with your local GAS AUDIO POWER dealer.
If you use the BASS BOOST, make sure to turn down your gain first (to 0) before you start
adjusting it. Start a music track and very carefully turn the BOOST dial up until you start
hearing distortion, then follow the HOW TO chapter about gain to optimize your system.
Incorrect usage of the BASS BOOST can permanently damage your subwoofer.
Example: A
SB1-10