GAS MAX A2, User Manual

Page: 17 / 32

16
HOW TO
Install the fuses in the fuse holder and reconnect
the negative power source terminal . Be pre-
pared to disarm your vehicle’s alarm and to
enter your radio/source unit code.
Time to test it out! Turn the ignition on your vehicle and turn the source/head unit on. Make
sure that the amplifier’s power indicator is on and shows that there’s power coming all the
way through, if not – turn the head unit off, the ignition off, disconnect the negative power
source terminal and re-check all your connections.
One last thing... We know you are ready to show off your upgraded sound system to the
world, but before you reattach all panels and put the head unit back in place, do a final
check. Make sure that all the speakers have a signal by playing some really good music,
turning the head unit volume up just a bit, and just slightly turning the level/gain on the
amplifier. WARNING! Do not turn the level/gain more than to just hear the music (read
through the HOW TO-section on setting the level/gain before further use).