GAS MAD PB1, User Manual

Page: 6 / 16

SPECIFICATIONS
5
Below you’ll find the specifications that has been checked and tested in our workshop. The
specifications aren’t directly connected with the sound pressure in the vehicle, and
shouldn’t be used as the sole indicator for comparison with other enclosures. The MAD PB1
SPL enclosures are loaded with MAD PM1 midrange speakers and PT1 tweeters.
Component
Tweeter size
Nominal impedance
Power MAX
Freq. response
Voice Coil
Power RMS
SPL tweeter
1” (25mm)
4 Ohm
100W
2000-20000Hz
1" KSV
50W
Magnet
HQ Ferrite
Component
Size
Enclosure material
Power MAX
Freq. response
Power RMS
Pre-loaded
SPL enclosure
4x6.5” (165mm)
2x1” (25mm)
MDF board
680W
100-20000Hz
340W
MAD PB1-46
Nominal Impedance 2+2 Ohm
Sensitivity 97dB
MAD
PT1-254 TWEETER
Cone Black matte
alu. diaphragm
Housing Aluminum
Capacitor 3.3uF MKT 250V
Woofer basket
Woofer suspension
Woofer magnet
Woofer spider
Steel
2R cloth surround
HQ Ferrite
Polycotton
Freq. response
Sensitivity
Power MAX
100-12 000Hz
94dB
120W
MAD PM1-64 WOOFER
Voice Coil 1" KSV
Component SPL midrange
Woofer size 6.5” (165mm)
Nominal impedance 4 Ohm
Power RMS 60W
Woofer cone Reinforced
pressed paper
Type
Slope
Cut off
Tweeter level
High pass
6 db
7000 Hz
N/A
MAD PB1 CROSSOVER