6 CONTROLS
14
Warning
Risk of injury
If the magnetic switch remains in the holder
during a fall, the vehicle is not immediately deactivated.
–
Make sure that the loop of the magnetic switch is securely
attached to the user’s protective clothing or wrist so that
the magnetic switch is disconnected from the holder in the
event of a fall.
If the red magnetic switch on the handlebar is disconnected from the
holder, e.g., in the event of a fall, the vehicle is switched off.
By removing the magnetic switch from the handlebar, the vehicle can be
quickly switched off in any operating state.
6.5
Switch-off button (Option: Homologized)
E01408-10
Switch-off button
1
is fitted on the right side of the handlebar.
Possible states
• The switch-off button
is in the basic position
–
In this position,
the ignition circuit is closed and the engine can be started.
• The switch-off button
is pressed
–
In this position, the ignition
circuit is interrupted, a running engine stops, and a non-running
engine will not start.
6.6
Light switch (Option: Not homologized)
E01330-10
The light switch
1
is mounted on the frame on the left behind the
steering head.
Possible states
Light on
–
Light switch is tilted to the rear. In this position,
the front light and the tail light are switched on.
Light off
–
Light switch is tilted to the front. In this position,
the front light and the tail light are switched off.
6.7
Light switch (Option: Homologized)
E01410-14
Light switch
1
is fitted on the left side of the handlebar.
Possible states
Low beam on
–
The light switch is turned counterclock-
wise. In this position, the low beam and the tail light are
switched on.
High beam on
–
Light switch is turned clockwise. In this
position, the high beam and the tail light are switched on.
