GAS GAS TXT BOY - 2009, User Manual

Page: 14 / 27

-
16
-
14
Coolant system –
Checking/topping up
To reach the radiator cap, proceed
as follows:
- Undo the bolts shown by the arrow and
remove the fuel tank cover and the rear seat
unit.
- Carefully lift and remove the fuel tank.
Warning: If the motorcycle has just been used,
wait a few minutes before opening the radiator
cap. Risk of burns!
- Turn cap A in an anti-clockwise direction until
it is loosened.
- Wait a few seconds, then push the cap
downwards, finish the turn in the same direction
and remove the cap.
- The level of coolant should be at the lower
edge of the filler neck of the radiator, below
the position of the cap seal. If this is not the
case, top up with coolant.
Warning: Only use coolant suited to light-alloy
engines, with antifreeze protection of up to -
30 ºC.
C
7