GAS GAS TXT 125 2018, Workshop Manual

Page: 54 / 84

Workshop manual
-54-
- fit front brake caliper (7) and the disc cover (8).
- Tighten mounting screws (9) to the specified torque.
Tightening torque 25 Nm. +/-2
With the front brake engaged, move the fork up and down several
times to seat the axle and check the operation of the front brake.
- Keeping the fork in parallel, tighten the axle clamping screw to the specified
torque.
Tightening torque 23Nm. +/-2
REMOVING THE REAR WHEEL
- lift the rear wheel off the ground and rest it on a block or maintenance stand
positioned under the engine
Remove the following components:
- axle nut (2) and transmission chain adjuster (1).
- Transmission chain (3).
- axle (4), transmission chain adjuster and rear wheel.
Do not engage the brake pedal after removing the front wheel. The
caliper pistons would move, making fitting difficult.
7
8
9
9
10
maintenance of the frame
1
2
3
2