TROUBLESHOOTING
NOTE
This is not an exhaustive list of malfunctions, it only shows the most common problems.
MALFUNCTION
POSSIBLE CAUSE
REMEDY
Engine does not start
Engine start but then stops
- Seized crankshaft.
- Seized cylinder / piston / jornal bearing.
- Seized transmission assembly.
- Motorcycle inactive too long.
- Wet or fouled spark plug.
- Flooded engine.
- Incorrect air/fuel mixture.
- Incorrect air supply.
- No fuel.
- Go to a specialized workshop.
- Go to a specialized workshop.
- Go to a specialized workshop.
Drain old fuel out of the tank. With the fuel tank filled with
new fuel, the engine will start immediately.
- Clean and dry or replace the spark plug.
- In order to "relieve the engine", accelerate to max. speed,
press the starter pedal 5 or 10 times. Then, start the engine
as described above. If the engine fails to start, remove the
spark plug and dry it.
- Clean the fuel tank air vent. Adjust the air cleaner duct.
- Close the starter. Clean fuel tank air vent. Adjust the air
cleaner duct.
- Fill up the fuel tank.
1
2
-
44
-
