GAS GAS SM 700 2023, Owner'S Manual

Page: 87 / 128

ELECTRICAL SYSTEM 14
85
Finishing work
–
Check the headlight setting. ( p. 86)
14.9 Changing the headlight bulb
Note
Impairments to reflectors and lamps Grease on the reflector reduces the emitted light.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
Grease residue on the bulb reduces heat dissipation and increases the heat of the bulb, thus reducing its service life.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 84)
V02741-10
Main work
–
Unplug connector
1
.
–
Take off protection cap
2
of the headlight bulb.
V02742-10
–
Detach spring bar
3
.
–
Remove headlight bulb
4
.
–
Insert a new headlight bulb into the headlight housing.
Headlight (H4/socket P43t) ( p. 111)
–
Fix the headlight bulb in the headlight using the spring bar.
–
Mount the protection cap. Plug in the connector.
Finishing work
–
Install the headlight mask with the headlight. ( p. 84)
–
Check the headlight setting. ( p. 86)
14.10 Changing the position light lamp
Note
Impairments to reflectors and lamps Grease on the reflector reduces the emitted light.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
Grease residue on the bulb reduces heat dissipation and increases the heat of the bulb, thus reducing its service life.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 84)