GAS GAS MC-E 5 Owner'S Manual Download Page 17

Page: 17 / 104

CONTROLS 6

6.1

Hand brake lever

M01656-10

Hand brake lever

is fitted on the right side of the handlebar.

The hand brake lever is used to activate the front brake.

6.2

Throttle grip

M01656-11

The throttle grip

is fitted on the right side of the handlebar.

After activation, the vehicle initially does not react to the throttle grip to
prevent accidental acceleration.

The throttle grip must be closed beyond the basic position to activate
the throttle response.

Only then does the vehicle switch to ready mode.

6.3

On/Off button

M01831-10

The On/Off button

is located on the right side of the Powerpack LV.

Possible states

• Vehicle switched off

–

In this operating state, the vehicle is deacti-

vated.

• Vehicle in standby mode

–

In this operating state, the vehicle is

activated.

6.4

Magnetic switch on handlebar

M01657-10

The holder for the red magnetic switch

is located on the left side of

the handlebar.

Possible states

• Magnetic switch

mounted on handlebar

–

When the magnetic

switch is mounted on the handlebar, the vehicle can be activated
and ridden.

• Magnetic switch

removed from handlebar

–

When the magnetic

switch is removed from the handlebar, the vehicle cannot be acti-
vated or ridden.

Summary of Contents for MC-E 5









































































































Search results

Summary of Contents for MC-E 5

Reviews:

Related manuals for MC-E 5

Brands by name

Popular brands

GAS GAS MC-E 5, Owner'S Manual

Search results

Summary of Contents for MC-E 5

Reviews:

Related manuals for MC-E 5

Brands by name

Popular brands