GAS GAS MC 85 2023, Owner'S Manual

Page: 82 / 176

13 WHEELS, TIRES
80
H00935-10
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
1
and contact surfaces
A
of the
spacers.
Long-life grease ( p. 119)
–
Insert the spacers.
S04328-13
–
Clean and grease the wheel spindle.
Long-life grease ( p. 119)
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert the wheel spindle.
–
Mount and tighten screw
2
.
Guideline
Screw, front wheel
spindle
M20x1.5 35 Nm (25.8 lbf ft)
–
Operate the hand brake lever several times until the brake linings
are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. ( p. 41)
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
Tighten screws
3
.
Guideline
Screw, fork stub M8 15 Nm (11.1 lbf ft)
13.3 Removing the rear wheel
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 41)