GAS GAS MC 85 2023, Owner'S Manual

Page: 53 / 176

SERVICE WORK ON THE CHASSIS 11
51
11.16 Removing front fender
Preparatory work
–
Remove the start number plate. ( p. 50)
S04335-10
Main work
–
Remove screws
1
.
–
Remove screws
2
. Take off the front fender.
11.17 Installing front fender
S04336-10
Main work
–
Position front fender.
–
Mount and tighten screws
1
.
Guideline
Screw, front fender M6 6 Nm (4.4 lbf ft)
–
Mount and tighten screws
2
.
Guideline
Screw, front fender M6 6 Nm (4.4 lbf ft)
Finishing work
–
Install the start number plate. ( p. 50)
11.18 Removing the shock absorber
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 41)
S04337-10
Main work
–
Detach the brake line from the brake line guide.
–
Remove screw
1
and lower the rear wheel with the link fork as far
as possible without blocking the rear wheel. Secure the rear wheel
in this position.
–
Remove screw
2
, push splash protector
3
to the side, and
remove the shock absorber.