GAS GAS MC 85 2023 Owner'S Manual Download Page 19

Page: 19 / 176

CONTROLS 6

401950-11

The gear positions can be seen in the photograph.
The neutral or idle position

is between the first and second gears.

6.10

Kick starter lever

401954-10

Kick starter lever

is fitted on the right side of the engine.

The kick starter lever can be swiveled.

Info

Before riding, swing the kick starter lever inwards towards the

engine.

6.11

Foot brake lever

401956-10

Foot brake lever

is located in front of the right footrest.

The foot brake lever is used to activate the rear brake.

6.12

Plug-in stand

402001-10

The support for plug-in stand

is the left side of the wheel spindle.

The plug-in stand is used to park the motorcycle.

Info

Remove the plug-in stand before riding.

Summary of Contents for MC 85 2023

















































































































































































Search results

Summary of Contents for MC 85 2023

Reviews:

Related manuals for MC 85 2023

Brands by name

Popular brands

GAS GAS MC 85 2023, Owner'S Manual

Search results

Summary of Contents for MC 85 2023

Reviews:

Related manuals for MC 85 2023

Brands by name

Popular brands