GAS GAS F0001U1 Owner'S Manual Download

Page: 75 / 104

WHEELS, TIRES 15

15.1

Removing the front wheel

Preparatory work

–

Raise the motorcycle with a lift stand. (

p. 42)

M01697-10

Main work

–

Remove screw

–

Loosen screws

M01698-10

Warning

Danger of accidents

Damaged brake discs reduce the

braking effect.

–

Always lay the wheel down in such a way that the brake
disc is not damaged.

–

Hold the front wheel and remove the wheel spindle. Take the front
wheel out of the fork.

Info

Do not actuate the hand brake lever when the front wheel is
removed.

H00934-10

–

Remove spacers

15.2

Installing the front wheel

Warning

Danger of accidents

Oil or grease on the brake discs reduces the braking effect.

–

Always keep the brake discs free of oil and grease.

–

Clean the brake discs with brake cleaner when necessary.

Summary of Contents for F0001U1









































































































Search results

Summary of Contents for F0001U1

Reviews:

Related manuals for F0001U1

Brands by name

Popular brands

GAS GAS F0001U1, Owner'S Manual

Search results

Summary of Contents for F0001U1

Reviews:

Related manuals for F0001U1

Brands by name

Popular brands