GAS GAS F0001U1 Owner'S Manual Download

Page: 68 / 104

14 BRAKE SYSTEM

14.9

Checking the free travel of the foot brake lever

Warning

Danger of accidents

The brake system fails in the event of overheating.

If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear brake.

–

Set the free travel on the foot brake lever in accordance with the specification.

M01694-10

–

Disconnect spring

–

Move the foot brake lever back and forth between the end stop and
the foot brake cylinder piston bracket and check free travel

Guideline

Free travel of foot brake lever

3 … 5 mm (0.12 … 0.2 in)

» If the free travel does not meet specifications:

–

Adjust the free travel of the hand brake lever.

(

p. 66)

–

Attach spring

14.10

Adjusting the free travel of the foot brake lever

Warning

Danger of accidents

The brake system fails in the event of overheating.

If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear brake.

–

Set the free travel on the foot brake lever in accordance with the specification.

M01694-11

–

Detach the foot brake lever spring.

–

Loosen nut

–

Turn push rod

accordingly until you have free travel

Guideline

Free travel of foot brake lever

3 … 5 mm (0.12 … 0.2 in)

–

Hold push rod

and tighten nut

–

Attach the foot brake lever spring.

–

Check whether the basic position of the foot brake lever is suitable
for the rider.
» When the basic position of the foot brake lever needs to be

adjusted:

–

Adjust the basic position of the foot brake lever.
(

p. 67)

Summary of Contents for F0001U1









































































































Search results

Summary of Contents for F0001U1

Reviews:

Related manuals for F0001U1

Brands by name

Popular brands

GAS GAS F0001U1, Owner'S Manual

Search results

Summary of Contents for F0001U1

Reviews:

Related manuals for F0001U1

Brands by name

Popular brands