GAS GAS ES 700 2023, Owner'S Manual

Page: 55 / 139

SERVICE WORK ON THE CHASSIS 11
53
11.9 Removing the seat
W00174-10
–
Pull on loop
1
and raise the rear of the seat.
–
Pull the seat back and lift it off.
11.10 Mounting the seat
V02715-10
–
Hook the seat using holding lugs
1
on to bushings
2
, lower the
seat at the rear and push it forward.
–
Push locking pin
3
into lock housing
4
and push the back of the
seat down until the locking pin locks in place with an audible click.
–
Check that the seat is correctly mounted.
11.11 Removing the tool set
Preparatory work
–
Remove the seat. ( p. 53)
V02730-10
Main work
–
Take the hexagon socket wrench for loosening and mounting
screws
1
from bracket
A
on the underside of the seat.
–
Remove screws
1
.
–
Take off the left side cover.