-
36
-
(1). Fork tube
height
REAR SUSPENSION
The rear suspension is made up of a shock absorber, swing arm,
tie rods and rocker arm.
In general the operating characteristics of the single shock are similar
to the front fork however this is characterized as well as by the shock,
the articulated quadrangle composed of the rods and rocker arm.
To suit various riding conditions, the spring preload of the shock
absorber can be adjusted or the spring can be replaced with an
optional one. Also the dampening force can be adjusted easily so
changing oil viscosity is unnecessary.
Extension adjustment
To adjust this, rotate the screw on the rear of the shock until noting
a click.
There is a possibility of 32 Clicks in total.
Standart rebond adjustement : 22 clicks (open).
(Anti-clockwise from the completely closed position).
Compression adjustment
To adjust, rotate the control on the gas reservoir using the point of
a screwdriver until noticing a «click».
Hight speed compression adjustment:
Range of 15 clicks.
The standart is 9 clicks
Low speed compression adjustment:
Range of 22 clicks.
The standart is 12 clicks
(A). Rebound
adjustment
(1)
(A)
