GAS GAS EC 350F Owner'S Manual Download

Page: 42 / 150

11 TUNING THE CHASSIS

F03171-10

–

Turn adjusting screw

clockwise with a screwdriver as far as the

last perceptible click.

Info

Do not loosen fitting

–

Turn counterclockwise by the number of clicks corresponding to the
shock absorber type.
Guideline

Lowspeed compression damping

Comfort

17 clicks

Standard

15 clicks

Sport

13 clicks

Info

Turn clockwise to increase damping; turn counterclockwise
to reduce damping during compression.

11.4

Adjusting the high-speed compression damping of the shock absorber

Caution

Risk of injury

Parts of the shock absorber will move around if the shock absorber is detached incorrectly.

The shock absorber is filled with highly compressed nitrogen.

–

Please follow the description provided. (Your authorized GASGAS Motorcycles workshop will be glad to help.)

Info

The effect of the high-speed compression adjuster can be seen in fast compression of the shock absorber.

F03172-10

–

Using an open end wrench, turn adjusting screw

clockwise all

the way.

Info

Do not loosen fitting

–

Turn counterclockwise by the number of turns corresponding to the
shock absorber type.
Guideline

Highspeed compression damping

Comfort

2.5 turns

Standard

2 turns

Sport

1.5 turns

Info

Turn clockwise to increase damping; turn counterclockwise
to reduce damping during compression.

Summary of Contents for EC 350F























































































































































Search results

Summary of Contents for EC 350F

Reviews:

Related manuals for EC 350F

Brands by name

Popular brands

GAS GAS EC 350F, Owner'S Manual

Search results

Summary of Contents for EC 350F

Reviews:

Related manuals for EC 350F

Brands by name

Popular brands