GAS GAS EC 350F, Owner'S Manual

Page: 120 / 150

18 SERVICE WORK ON THE ENGINE
118
F03268-10
–
Lay the motorcycle on its right side and fill the oil filter housing
approx.
⅓
full with engine oil.
–
Place the oil filter into the oil filter housing.
–
Oil the O-ring of the oil filter cover and mount it together with oil
filter cover
7
.
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover M6 10 Nm (7.4 lbf ft)
–
Stand the motorcycle upright.
401955-12
–
Remove filler plug
8
from the clutch cover together with the O-
ring, and fill up with engine oil.
Engine oil 1.0 l (1.1 qt.) Engine oil (SAE
10W/50) (
p. 137)
Info
Too little engine oil or poor-quality engine oil will result in
premature wear of the engine.
–
Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling
them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when
running the engine.
–
Use effective exhaust extraction when starting or run-
ning the engine in an enclosed space.
–
Start the engine and check for leaks.
Finishing work
–
Check the engine oil level. ( p. 116)
18.4 Adding engine oil
Info
Too little engine oil or poor-quality engine oil will result in premature wear of the engine.