GAS GAS EC 350F, Owner'S Manual

Page: 105 / 150

ELECTRICAL SYSTEM 15
103
15.9 Checking the headlight setting
400726-10
–
Position the vehicle upright on a horizontal surface in front of a light
wall and make a marking at the height of the center of the low beam
headlight.
–
Make another mark at a distance
B
under the first marking.
Guideline
Distance
B
5 cm (2 in)
–
Position the vehicle vertically at a distance
A
away from the wall.
Guideline
Distance
A
5 m (16 ft)
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider.
» If the boundary between light and dark does not meet specifica-
tions:
–
Adjust headlight range. ( p. 103)
15.10 Adjusting the headlight range
Preparatory work
–
Check the headlight setting. ( p. 103)
–
Remove the headlight mask with the headlight. ( p. 101)
S04493-10
Main work
–
Turn bolt
1
clockwise.
The headlight range increases.
–
Turn bolt
1
counterclockwise.
The headlight range decreases.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider (instructions on how to
apply the mark: Checking the headlight setting).
Info
If you have a payload, you may have to correct the headlight
range.
–
Install the headlight mask with the headlight. ( p. 101)
–
Check the headlight setting. ( p. 103)