GAS GAS EC 350F, Owner'S Manual

Page: 104 / 150

15 ELECTRICAL SYSTEM
102
F03247-11
–
Position the headlight mask and secure it with rubber straps
2
.
The holding lugs engage in the fender.
–
Position the brake line and wiring harness in the brake line guide.
Finishing work
–
Check the headlight setting. ( p. 103)
15.8 Changing the headlight bulb
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 101)
F03249-10
Main work
–
Turn protection cap
1
together with the underlying bulb socket
counterclockwise all the way and remove it.
–
Pull bulb socket
2
of the position light out of the reflector.
F03250-10
–
Pull out headlight bulb
3
.
–
Insert the new headlight bulb.
Headlight (S2 / socket BA20d) ( p. 132)
–
Insert the protection cap with the bulb socket into the reflector and
turn it clockwise all the way.
Info
Check sealing lip
4
of the protection cap for correct seat-
ing.
–
Insert the bulb socket of the position light into the reflector.
Finishing work
–
Install the headlight mask with the headlight. ( p. 101)
–
Check the headlight setting. ( p. 103)