THE EXHAUST SYSTEM
The exhaust and the silencer reduce noise and carry the gasses
away from the driver.
If the exhaust is damaged, rusted, dented or split then change it.
Change the silencer packing if the noise begins to be too loud or if
the engine performance drops.
Changing the silencer
1. Remove the right side carrier cover.
2. Loosen the clamp
(C)
.
3. Remove the screws
(B)
.
(A). Silencer
(B). Silencer attachment bolts.
(C). Clamp
-
25
-
CLUTCH
Proper clutch lever play is 2-3 mm.
When there is too much play, first try to adjust the level of the clutch
lever.
Tighten the adjustment bolt to obtain the optimal play.
(A). Clutch Lever.
(B). Clutch cylinder piston rod.
(C). Hydraulic fluid tank.
If the clutch lever adjustment is at its limit, it should be adjusted
using the clutch cylinder piston rod.
(C)
(B)
(A)
(B)
(A)
(C)
