Gas Detection (Australia) Pty Ltd Page 35 of 44
M-GDA-3000 Rev 1
11.8. How to use VERSION MODE
After password has been confirmed, the detector goes into
level1 mode.
Select VERSION mode by touching “↑” or “↓” switch.
At this moment, if function key is touched, the detector will go
into IR SENSOR DATA MODE submenu.
In this screen, program version of the product is shown.
A message shown in the first row indicates program version of
GDA3000A.
A message shown in the second row indicates program version
of GSA920A.
It is H/W version.
It is HART device version which has been configured.
It is HART protocol version which has been configured.
Touch “FUNC” switch, then the detector’s mode will return back
to VERSION MODE.
