G F M 6 0 0 U S E R M A N U A L
Only clean the head of the impeller!
Probes are on no account to be fully immersed in the solution.
Cable, extension rod, case
The following agents:
-Soapy water
-EDP plastic cleaner
-Window cleaning fluid (without ammonia) -and for any stubborn deposits,
pure benzene
These solutions are only to be applied to the parts with a fluff-free cloth.
Only carry out surface cleaning! The parts are never to be immersed in the
solution!
Snap Head
The snap head fixing system renders it very simple to fit a new impeller to the flow
probe: this saves costly non-productive time and in the event of damage to the
snap-head enables you to have the probe back in service in a matter of seconds by
simply changing the snap-head.
Checking/factory inspections
Depending on the application and the loads on the instrument we consider it highly
advisable to have the instrument respectively the probe annually checked or
inspected / repaired at our factory.
GFM600
- 19 -
GFM600 Velocity Monitor User Manual
