2 3
PRODUCT MANUAL
SANVITO
Annex D: Guidelines and Standards
D-1 RoHS Declaration
Devices comply with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of
8th June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
D-2 Supplier Declaration – Directive EG 1907/2006 REACH
Garz & Fricke is manufacturer of electronic products, thus - in the sense of REACH - we are so called
„downstream users“. The products we supply to you are solely non-chemical products (goods). Moreover and
under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not
release any substance. For that, Garz & Fricke is neither obligatory for registration nor for the creation of
material safety data sheet (MSDS).
From state of knowledge today our products contain no substances of very high concern from the current SVHC
candidate list of the European Chemicals Agency in percentage >0,1.
We will immediately inform you in correspondence to REACH-Article 33 if any substance of content >0,1 percentage in our
goods will be classified alarming by the ECHA. Based on the current status, however, we do not expect such an incidence.
D-3 UL Certification
Customers of Garz & Fricke are attending on different markets. These markets are subjected to different
UL certifications. Therefore Garz & Fricke have no UL certification for their products.
To obtain UL certifications the product is designed to respect the following constraints:
All electronic printed circuit boards are conform to UL standard
Garz & Fricke do not guarantee to obtain UL certifications. Please contact us for further information.
D-4 Garz & Fricke Conformity Statement
Garz & Fricke GmbH develops and distributes reliable, ARM-based embedded solutions.
We offer various solutions from computer-on-modules (COM) to single-board computers (SBC) and
fully-assembled human machine interface (HMI) with pre-installed operating system, display and housing.
These solutions are offered exclusively as OEM products. They do not include any application software that is
intended for the end user. Therefore, we do not make any EU declarations of conformity in the name of Garz &
Fricke GmbH and do not provide the products with the CE mark.
Our customers provide the products with application software and build them into an end-user device as part
of an industrial production process. They identify themselves as a manufacturer by affixing a license plate with
their company or brand name.
We are happy to assist our customers when they compile the necessary technical documentation for the EU
Declaration of Conformity of the complete device. We provide e.g. Supplier declarations or RoHS certifications,
issue EMC testing results and carry out safety / radio / SAR tests, etc.