Garz & Fricke SANTARO 12.1 OF RES, Product Manual

Page: 30 / 42

Pin Name Description Level
1 12 V
Supply for 12V backlight supply
the nominal DC Power (X1) should
be 13 to 32 V
12V +-2% max 3 A 2 12 V
3
12 V
4
5 V
Supply 5V +-3% max 3 A
5 5 V
6 GND Ground
7
GND Ground
8
GND Ground
9 PWM Typ. 250Hz 16 Bit 3.3 V
10 PWM 5 V Driven by Signal of Pin 9 5 V
11
GPIO Digital Output 3.3 V
12 GPIO 5 V Driven by Signal of Pin 11 5 V
Header: Molex 53398-1271
Plug: Molex 51021-1200
Pin Name Description Level
1 Supply 5 V
2 PCK0_Gpio4_22
3.3 V
3
PCK1_GPIO4_23
4 PCK2_GPIO4_24
5 PCK3_GPIO4_25
6 I2C1 SDA Pullup 1kOhm
7
I2C1 SCL Pullup 1kOhm
8 Ground
Header: Header JST SM08B-SURS-TF
Plug: JST 08SUR-32S
I2C1 slave address list I²C3 slave addresss list
0001010 Audio Codec 1000100 ResTouch Controller
0001000 PMIC 0001000 USB-HUB
1001001 Temperature Sensor 0000100 CapTouch Extern1
1010000 EEPROM Memory
1011000 EEPROM Identification 0111000 CapTouch Extern2
1010001 RTC
3 0
1
PRODUCT MANUAL
SANTARO core
6.20 Backlight (X108)
6.21 I2C (X106)