3.2 Using a drill bit with an 8 mm diameter, make 8 holes
you reserve for installing the chimney and cooker hood body. See Pic 2.
3.3 Insert wall plugs into the holes that you have drilled
fasten 2 pcs support screw
See Pic 2.
3.4 Hang the cooker hood onto the support screws.
3.5 Insert self-tap screw ST4*30 mm into the safety h
the cooker hood is well fixed.
housing, with diameter of 6mm.
3.6. Attach the expansion pipe
on the outlet by cable tie.
6
Using a drill bit with an 8 mm diameter, make 8 holes in the wall at the position that
the chimney and cooker hood body. See Pic 2.
e holes that you have drilled for the cooker hood body,
ST4*40 mm halfway in, leaving them 2 mm out of the
Hang the cooker hood onto the support screws.
tap screw ST4*30 mm into the safety holes and fully fasten it to ensure
the cooker hood is well fixed. Note: The two safety vents are positioned on the back
housing, with diameter of 6mm. See pic 3.
expansion pipe on the outlet as shown below. Fix the ex
in the wall at the position that
the chimney and cooker hood body. See Pic 2.
for the cooker hood body,
ST4*40 mm halfway in, leaving them 2 mm out of the wall.
oles and fully fasten it to ensure
Note: The two safety vents are positioned on the back
as shown below. Fix the expansion pipe
