16
III
、
Cut-out Dimensions
~ Open an installation hole on the worktop of cabinet as per
【
illustration 1
】
.
(Note : 1
、
The height under the base tray shall reserve more than 100mm and
2
、
* Minimum clearance from glass edges of hob to wall.)
Cut out dimensions(unit/mm)
：
(W) 265 x (D) 490
【
illustration 1
】
IV
、
Correct Position of Burner Ring, Cap & Trivet
Incorrect position of burner ring, cap and trivet will affect the flame performance
，
and causing damage of burner ring and glass panel or other accidents.
1) Fit burner ring and cap properly without gap
【
illustration 2
】
.
【
illustration 2
】
2) Put the trivet onto the drip plate correctly and a design of concave on the drip
plate is provided to fit for the trivet.
