© ANITA
MP02800EN_180126
10
Switch off the machine!
Danger of injury due to unintentional starting of the machine!
•
Raise the roller presser 1 and swing it out.
•
Loosen screw 2 and insert the needle as far as possible. The long groove must face to the
left
（
Single Needle).
•
Loosen screws 2 and insert the needles as far as possible. the long groove of the left needle is
facing right, and that of the right needle is facing left
（
Double Needle
）
.
•
Tighten screws 2 and swing roller presser 1 back into position.
6.02 WINDING THE BOBBIN THREAD, ADJUSTING THE THREAD TENSION
Fig. 11
•
Place an empty bobbin 1 onto bobbin shaft 2.
•
Thread the bobbin in accordance with the pictures and wind it anti-clockwise around bobbin 1 a
few times.
•
Switch on the bobbin winder while at the same time pressing bobbin winder spindle 2 and lever
3.
www.garudan.cz
Summary of Contents for GP-110-147
Page 18: ......
