Garudan anita GC-3317 Series, User Manual

Page: 8 / 61

ANITA ©
MP00100EN_170907
8
6. INSTALLING THE THREAD STAND
Assemble the Thread stand, and insert it in the hole
in the machine table, and fix in by tightening nut (1).
For ceiling wiring pass the power cord through spool
rest rod (2). (fig 1)
(fig.1)
7. LUBRICATION
Prior to operation be sure properly lubricate the points marked with the arrows. When oiling
all section requirring lubrication, after installation of the machine has been completed wait
for a while (approximately 10 minutes) so that oil can penetrace each section sufficiently
before starting continous operation. When starting the machine initially and after kept away
for a long time without using at all, apply two or three drops of oil each section noted with
an arrow mark, and to operate the machine continuosly, apply two or three drops of oil each
section whenever starting operation in the morning and in the afternoon.
(fig.2)
www.garudan.cz