background image

To prevent injury to the user or other people and property damage, the following instructions

Safety Precautions

This symbol indicates the possibility of death or serious injury.

Meanings of symbols used in this manual are as shown below.

!

!

WARNING

Always do this.

Never do this.

!

CAUTION

This symbol indicates the possibility of injury or damage to property.

Plug in power plug
properly.

Do not modify power cord
length or share the outlet
with other appliances.

Always ensure effective
earthing.

Unplug the unit if strange
sounds, smell, or smoke
come  from it.

Ventilate room before operating air
conditioner if there is a gas leakage from
another appliance.

Otherwise, it may cause electric
shock or fire due to

heat

generation.

excess

fire due to heat generation.

Incorrect earthing may cause
electric shock.

shock.

It may cause fire.

due to heat generation.

or electric shock.

shock.

shock.

If the power cord is damaged, it
must be replaced by the manufac-

centre or a similarly qualified per-
son in order to avoid a hazard.

This could damage your health.

Incorrect installation may cause
fire and electric shock.

Do not operate or stop the
unit by inserting or pulling
out the power plug.

Do not operate with wet
hands or in damp
environment.

Do not allow water to run
into electric parts.

Do not use the socket if it is
loose or damaged.

Do not use the power cord
close to heating appliances.

unspecified power cord.

Always install circuit
breaker and a dedicated
power circuit.

Do not open the unit
during operation.

Do not use the power cord near
flammable gas or combustibles, such
as gasoline, benzene, thinner, etc.

Do not disassemble or modify unit.

!

!

!

!

!

WARNING

!

2

!

!!

must be followed. Incorrect operation due to not following instructions may cause harm or
damage. The seriousness is classified as follows:

Do not use a bamaged or

This may cause electric shock or 

fire

This may cause electric shock or fire.

turer or an authorized service

Do not direct airflow
directly at people.

This may cause electric shock or

This may cause electric shock.

This may cause failure of machine

 and electric

To do otherwise may cause fire

This may cause fire and electric

This may cause electric shock.

This may cause fire and electric

This may cause an explosion or fire.

This may cause failure and electric shock.

.

I do not understand the relevance of 

this. Perhaps something other than 

"firearms" is meant? Maybe "Install a 

safe distance from fireplace"? (I really

 have no idea.)

To do otherwise may cause explosion, fire and burns

Summary of Contents for 043-5488-8



























Reviews: