cleaned to ensure it is clear of dust and oil, also, inspect the working space of the
brake device, if abrasion (wear) of the brake disc is more than the maximum
working space (1mm), then the working space should be adjusted and if abrasion
of friction disc is near to the aluminum core, the brake disc should be replaced ,
otherwise, the brake device will be damaged.
c)
Gearing: cleaned and greased (i.e.no.1) every year.
d)
Bearing: cleaned and greased (i.e.no.1) every year.
e)
Hooks: to be checked periodically for deformation and wear, if the wear or
deformation measures a reduction of 10% or greater of the standard sizes (ref to
illustrated figure), replace the hooks.
f)
3)
Repair
There are no user serviceable parts inside hoist. Covers should only be removed by
qualified service personnel..
8)
Illustration figure for chain inspection
If chain is worn over the limit value, it must be replaced with a new one.
5) Illustration figure for hook inspection
If the size “b” and “c” is smaller than the 90% of the standard size, please replace with new one.
Dia. of chain
(d)
Wearing Limit value
(d)
Measure links
standard
value (p)
Wearing Limit
value (p)
7.1mm
6.4mm
5
106mm
109.2mm
4
02/08/2019
Instructions Manual for TECH0103 (H250)
6
