background image

Magnum P80F & P80C Personal Switches                      Installation and User Guide (07/03)

 

 

 

 

www  GarrettCom  com

.

.

1.0 SPECIFICATIONS

 

 

1.1 Technical 

Specifications 

 

Ports Performance  

 

 

       When a port is operating at 100Mbps: 

                            Data Rate: 100Mbps 
 

       When a port is operating at 10 Mbps: 

                            Data Rate: 10 Mbps

 

         

 

Network Standards

 

 

100Mb: Ethernet IEEE 802.3u, 100BASE-TX, 100BASE-FX 

 

10 Mb:   Ethernet IEEE 802.3, 10BASE-T 

 

Auto-sensing for speed: IEEE 802.3u 

               

Packet-Processing Between Domains  

 

       Filtering and Forwarding Rate from 100Mbps ports: 148,800 pps max  

 

Filtering and Forwarding Rate from 10 Mbps ports: 14,880 pps max.

 

 

Processing type: Store and Forward 

 

Auto-learning:  16K address table, shared for all traffic domains 

 

Packet buffers: 512KB, dynamically shared on all domains 

 

Latency (not including packet time):    100 to 10 Mbps:  5

µ

s  

 

 

    10 

to 

100Mbps: 

5

µ

 

Path Delay Value

: 50 BT on all ports

 

 

 

 

 

Maximum Ethernet Segment (or Domain) Lengths

 

 

10BASE-T (Unshielded twisted pair) 

 - 100 m (328 ft)   

 

100BASE-TX (CAT 5 UTP) 

 

 - 100 m (328 ft) 

 

        

100BASE-FX, half-duplex: (multi-mode) 

 - 412 m (1350 ft) 

 

 

100BASE-FX, full-duplex: (multi-mode) 

 - 2.0 km (6,562 ft) 

 

 

100BASE-FX, half-duplex: (single-mode) 

 - 412 m (1350 ft) 

 

        

100BASE-FX, full-duplex: (single-mode) 

 - 20.0 km (65,620 ft) 

 

        100BASE-FX, full-duplex: (single-mode, long)   - 40.0 km (131,240 ft) 

Operating Environment

 

 

Ambient Temperature:   

32

º

F to 120

º

F (0

º

C to 50

º

C) 

 

Storage Temperature:  

-5

º

C to 160

º

F (-20

º

C to 70

º

C) 

 

Ambient Relative Humidity:  10% to 95% (non-condensing)

 

                Power Supply (External

 

Input: 

95-125 vac at 60Hz for “-d” Models 
200-250 vac at 50Hz for “-i” Models, which have IEC 
power cable connector in the external power unit. 

 

Output: 

5VDC, 2Amps  

 

Polarity: 

center positive, shell negative 

 

Power Consumption: 8 watts typical, 10 watts max.

 

 

Summary of Contents for Magnum P80F-MSC-d





























Reviews: