background image

Magnum P62-Series Hardened Switches                               Installation and User Guide (05/05)

 

 

 

www  GarrettCom  com

.

.

 

REVISIONS 
 

Rev J 05/07: 

Minor updates to power substation notes and logo change 

Rev J 05/05: 

minor updates, Auto-cross(MDIX) on RJ-45 ports, DIN-Rail mounting wording

 

Rev

 I 11/03  

Console port pin assignments added  

Rev

 H 08/03  

The DC Power input range is corrected, from 20-70VDC to 20-60VDC 

Rev G  03/03

 : This revision adds the DIN-RAIL mounting options & UL requirement for DC . 

Rev F  11/02

 : This revision adds the Managed  mP62 models. 

Rev E  06/02 : 

Changed Altitude spec, and added Mechanical mounting drawing in 3.1.2. 

Rev D 01 / 02: 

This revision changes the installation proc. and operating Temp. range.

 

Rev C 11/01

: This revision includes the magnum P62F-NOF, and metal mounting.

 

Rev B 08/01

: This revision includes the update of additional power source  

Rev A 04/01

: This revision is the initial release of the P62F Hardened Switches user manual. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for Magnum mP62-5V -1M1SSC









































Reviews: