Magnum14E Media Converters Installation and User Guide (10/02)
48
www GarrettCom com
.
.
Converter in order to decide what to do. Not receiving FLPs would indicate (incorrectly) that
the Magnum 14E is only capable of half-duplex operation. Setting the switch in the AN
position causes FLPs to be sent, advertising full-duplex capability.
BUT NOTE
. . . it is up to
the user who chooses the AN position to determine that the device on the other end of the fiber
cable is, in fact, capable of full-duplex operation. If it is not, choose the
reg
position and do
not advertise full-duplex.
The
reg
position is also suitable for use when non-auto-negotiating devices are
attached. In this case, the attached RJ-45 port (such as in a traditional managed switch) is set to
half-or full-duplex by the operator, and does not depend upon auto-negotiating FLPs. The 14E
itself is transparent half- or full-duplex, and will always operate correctly in this situation.
