A
PPENDIX
B -
Network Commands
Router (IP)
DS2000-TS Administrator’s Guide
B - 17
Figure B-16. Configured VPN Names Screen
Figure B-17. VPN Configuration Screen
Complete parameters as required. Parameters and their values are explained in
When entries are completed, enter
Y
in the
Process selections
field and press
<Enter>
. The
Configured
VPN Names
screen (
) is displayed and the newly configured VPN is listed on the screen.
Set up IP filtering to define what traffic and what types of applications will use the VPN. See “IP Filters” on
page B-7 for more information.
*** Configured VPN Names ***
Last changed: 0-0-90
0:00:00
Enter command number:
__________[DynaStar_24]___________
To add entry, just press <RET>
Press ESC to return to previous menu
To edit, enter service # <RET>
Cursor up/down for more entries
To delete, enter service # <CNTL-D>
NOTE: delete takes effect immediately
*** VPN Configuration ***
VPN name: (15)
Dest. IP address: 0.0.0.0
Src. IP address: 0.0.0.0
IKE Encryption: Null
IKE Hash: MD5
IKE Lifetime: 0 (Secs., 0=unlimited)
IKE Setup: MAIN
Key Exchange: Private
Phase 2 Keys: N
Private Key: (16 Ascii)
Diffie-Hellman: 768-bit
Encapsulation: TUNNEL
IPSec Protocol: AH
IPSec Lifetime: 0 (Secs., 0=Unlimited)
IPSec Encryption: Null
_________[DynaStar_6b2c]__________ Process selections (Y/N): Y
Use <CTRL-D> to delete entry <RET> to toggle or type value
Use <TAB> and CURSOR to move fields Press ESC to return to previous menu
