A
PPENDIX
A -
Port Functions
Statistics
DS2000-TS Administrator’s Guide
A - 12
A.3
S
TATISTICS
The Statistics menu is reached from the Functions for Port menu by selecting
<2> Statistics
. The Statistics
menu differs depending on the port type previously selected. There are three port types in the
DS2000-TS
.
The following sections describe the menus and the characteristics for each port type. The port types are
Console (CON), Ethernet (E0), and Serial (ports S1 through S32).
A.3.1 Ethernet Port Statistics
The Ethernet Port Statistics menu is shown in
and the fields are described in
Table A-6
. The
statistics can be updated by pressing
<Enter>
while viewing this screen or cleared by pressing
<CTRL-D>
.
Figure A-10. Ethernet Port Statistics Menu
Table A-6. Ethernet Port Statistics Attributes
Field
Description
Port Number
The number of the port being displayed.
Enabled
Date and time the port was enabled.
Cleared
Displays date and time when statistics were last cleared using the <CTRL-D> option.
Current status
Indicates whether a connection is Up or Down. When Spanning Tree is active, shows
state in current spanning tree.
Frames
The number of frames sent/received.
Octets
The number of octets (bytes) sent/received.
Broadcasts
The number of LAN broadcast frames sent/received.
Multicasts
The number of LAN multicast frames sent/received.
Statistics for Enet Switch port
E3: Enet 3
Enabled: 7-14-04 12:33:29
Cleared: 7-31-04 10:56:01
Current status:
Link Up
TX to LAN
RX from LAN
Frames:
4052
349526
Octets:
485280
68980088
Broadcasts:
15
42658
Multicasts:
0
0
64-byte frames:
194216
65-127 byte:
72846
128-255 byte:
39544
256-511 bytes:
19319
512-1023 bt:
4163
1024-1522 bt:
23490
Alignment errors:
0
CRC/alignment errors:
0
Frame too short:
22
Transmitter failure:
0
Frame too long:
0
Collisions:
19
PHY receive errors:
0
Late collisions:
0
Dropped frames:
0
Multiple collisions:
6
Jabber:
0
Excessive collisions:
0
Deferred transmissions:
22
OSPF clock:
0
__________[DynaStar_24]___________
Press <RET> for statistics update
Press ESC to return to previous menu
Press <CTRL-D> to clear statistics
