11
Z-Lynk Wireless Operation
Apex
features a built-in Z-Lynk wireless transmitter
which can be used with Garrett MS-3 wireless
headphones and any Z-Lynk enabled devices (such as
any other headphones connected to a Z-Lynk receiver).
A Z-Lynk Wireless headphone icon
(see illustration)
on the LCD indicates the current status of your wireless
connection. A steady icon indicates the detector is
paired with an operating Z-Lynk receiver that is within
range. A flashing icon indicates that the detector is
searching for a receiver. Absence of the icon indicates
that
Apex’s
wireless transmitter is switched off.
Pairing:
To pair with a new set of headphones/
receiver, simply switch the headphone/receiver on,
hold within 2 feet (0.6 meters) of the
Apex
. Next, power
on
Apex
, press the MENU button, and continue tapping
the MENU button until the wireless icon is highlighted
(as indicated in this illustration). Press the (+) button to
pair the headphones.
Once paired, if the headphone/receiver is switched
off or moved out of range,
Apex
will search and attempt
to reconnect to the receiver for 5 minutes, indicated by
a flashing icon. If the connection is not reestablished
during this time,
Apex
will switch off its wireless
transmitter. To reconnect, simply switch the
Apex
off
and then on again
.
To un-pair (forget) a set of headphones, simply press
the press the MENU button to select the wireless icon
and then use the (-) button to un-pair.
Use of optional wired headphones:
Apex can also
be operated with any wired headphones that have a
1/8” plug. For headphones with a 1/4” plug, an optional
adaptor is available from Garrett.
Note:
Packages shipped with MS-3 headphones
include a user’s guide for full details on wireless
headphone operation.
