Garrett ACE 350, Owner'S Manual, Page: 6 / 97

ACE 350™ 5
QUICK START GUIDE
1. Install batteries.
The ACE 350 operates with four (4) AA batteries which are
already installed by Garrett.
2. Power ON.
Press and release the ON / OFF Power button. The ACE 350
powers on in the last mode used, automatically adjusts for
ground minerals and is ready to search.
(Factory default
mode is Coins.)
3. Select Mode.
Use the Mode Pushbutton to select a different detection
mode, when desired.
4. Adjust settings.
Adjust Sensitivity or Discrimination settings, if desired.
5. Begin scanning.
Lower the searchcoil to 1 to 2 inches above the ground and
scan the coil left and right at approximately 3 ft/second.