DETECTOR ASSEMBLY
4 Garrett Metal Detectors
ACE 300
i
™ 5
ACE 300
i
CONTENTS
If any part is missing, please contact Garrett Customer Service�
Nut, bolt,
mounting washers
Batteries
installed
Control housing with
S-shaped stem
Searchcoil
Coil cover
Upper, lower
stem (connected)
Cover-up
Headphones
Warranty card
Manual
Loosen lower camlock and extend lower stem� Insert mounting
washers, connect searchcoil to stem as shown, and hand-
tighten wing nut�
Loosen upper camlock, insert S-stem with control housing,
adjust lower stem to comfortable length, and hand-tighten
the camlocks� Wrap cable snugly around the stem with the
first turn of the cable over the stem�
Note: The arm cuff can be
adjusted by removing the screw
on the bottom and moving it to
the other hole�
