Garrett ACE 200, Owner'S Manual, Page: 5 / 11

6 Garrett Metal Detectors ACE 200 ™ 7
POWER ON/BASIC CONTROLS
Power ON/OFF
Button
Power ON/OFF —Press this button to turn power ON or OFF.
Factory Reset —To restore factory settings, press and hold
the power button for 5 seconds (until the detector produces
a fast double beep).
Low Battery Indicator —When the detector's batteries become
weak, the Low Battery Indicator will remain on.
TARGET INFORMATION
Target ID Cursor
(Upper Scale)
Target ID Legend
Discrimination Pattern
(Lower Scale)
Target ID Legend —Works with the Target ID Cursor to
indicate a target's probable identity, with Ferrous (iron)
targets at the left, non-ferrous targets that are thin or have
low conductivity in the middle, and thick or high conductivity
targets (e.g. thick silver) at the right.
Lower Scale —Displays the current discrimination pattern,
with lighted pixels indicating accepted targets and blank
pixels indicating rejected targets.
Target ID Cursor (Upper Scale) —Will display for every
target, but will produce audio only for targets accepted on the
Lower Scale.
Digital Target ID —Provides a value from 0 to 99 to identify
targets more precisely than the ID cursor.
Coin Depth Indicator —Shows the depth of a coin, or a
similar sized target. Note: targets larger than a coin may
display shallower than actual depth while targets smaller
than a coin may display deeper than actual depth.
The sample chart on the following page provides Digital
Target ID ranges of some commonly found items.
Coin Depth
Indicator
Digital Target ID
Low Battery
Level Indicator