USER MANUAL
USER MANUAL
Normal use
LED indications
Connect the charging cable to the EV (Electric Vehicle).
If authorization is activated, please hold a valid RFID-tag against the RFID reader on the side of the LS4 you want to use or use the
operator app to authorize charging. Charging will start instantly if the EV is ready for charging. See your EV charging manual.
When finishing charging, follow the EV’s instructions.
After charging: Release the charging cable from your EV and place the charging cable at designated place.
LED light indication When
Cause of error
Firm green
No EV connected
Charging station available and ready for charging
EV connected
State B: EV connected but not yet ready for charging
EV connected
State C: EV connected and ready for charging, but charging
station requires authentication to start charging (Free Charging =
"OFF").
Blinking green
(3 blinks)
When EV connects
The charging station detects that the cable is connected, but is
yet to detect the EV.
Blinking green
(30 second blink)
Whenever during operation
Charging station have received command from backend to start
charging and is waiting for EV to connect.
Firm blue
EV connected
Charging is ongoing (state C)
EV connected
Charging is paused (state B)
Blinking blue
Whenever during operation
Charging station/point is reserved for a specific user
Firm red
When connecting EV
Charging cable is damaged.
Whenever during charging
Residual Circuit Current Breaker (RCCB) triggered.
Whenever during charging
DC fault detected.
Whenever during charging
Circuit breaker (MCB) triggered - Overload / short circuit
Whenever during charging
Type 2 connector motor locking was released/unlocked (the
cable can be removed)
When connecting EV
The socket outlet can not engage locking mechanism to lock the
connector.
Whenever during charging
DC fault monitor may be defect.
Firm red
(3 seconds)
When RFID is presented
RFID card is not valid or not approved by backend.
Blinking red
Whenever during operation
Charging station/point is deactivated.
7
EN
