GARO GSOU-1 Quick Start Manual Download Page 1

Bruksanvisning Ljusrelä

Manual Twilight Switch 

GSOU-1

Egenskaper / Characteristics

• 1 modul, monterbar på DIN-skena

• matningsspänning AC230

• kopplar om utifrån nivån av omgivande ljus

• justerbar tidsfördröjning för att eliminera korttidsbelysning

• Belysningsnivån justerbar i två områden

• 100-50000 Lx och 1-100 Lx

• styr ingång för annan styrning t ex tidsomkopplare

• extern givare, lämplig för montering på väggen

• utgångskontakt: 1x16A omkoppling

• lysdiod utgångsindikering

• 1 module, DIN rail mounted

• Supply voltage: AC 230 V

• Switches according to level of surrounding light

• Adjustable time dwell to eliminate short term illumination

• Level of illumination adjustable in two ranges

• 100-50000 Lx a 1-100 Lx

• Controlling input for other controlling, e.g. time switch

• External sensor, suitable for mounting on the wall

• Output contact: 1x changeover 16A

• LED output indication

Beskrivning / Description

Anslutning / Connection

Funktioner / Functions

Säkerhetsinstruktioner / Main Instuctions

Apparaten är konstruerad för 1-fas-installation av AC/DC 12-240 V nätspänning och måste 

installeras i enlighet med de bestämmelser och standarder som gäller i användningslandet.

Vid installation av apparaten skall instruktionerna i denna bruksanvisning följas. Använd 

inte apparaten utanför de specificerade intervallen för de tekniska parametrarna. Installation 

och igångsättning får endast utföras av person som har tillräcklig elektroteknisk kompetens och 

är behörig för detta arbete och informerad om manualen. Personen som utför installationen 

ansvarar för att apparaten installeras säkert och korrekt. 

Var uppmärksam på apparaten mellan transport, förvaring och hantering. Om du upptäcker 

tecken på skada, deformation eller funktionsfel, eller om någon del saknas, skall du inte 

installera apparaten utan reklamera den hos försäljaren. När produkten inte skall användas 

längre går den att demontera och återvinna.

The device is constructed for 1-phase installation main and must be installed in accordance with 

regulations and standards applicable in the country of use. While installing the device

follow the instructions in this manual and on the cover packaging of the device. 

Do not operate the device out of the specified range of technical parameters. Installation 

and launching can be done only by a person with an adequate electro-technical qualification 

who is accredited for this work and is informed about this manual. The person who executes the 

installation is responsible for correct and safe installation of this device. 

Pay attention on the device between transportation, storing and handling. If you find any 

sign of damage, deformation, malfunction or a missing part, do not install this device and claim it 

at its seller. After stop using the product it is possible to demount and recycle.

1) Skydd av apparaten

Apparaten innehåller skydd mot överspänningstoppar och störpulser i elnätet. För att dessa 
skyddselement skall fungera korrekt måste lämpliga skydd av högre grad (VDE-grupp A,B,C respektive 
IEC I, II) monteras in i installationen. Apparaten måste skyddas mot överbelastning och kortslutning, 
som annars skulle kunna skada apparatens utgång. Apparaten är utrustad med skyddselement 
(varistorer) mot möjlig överspänning i elnätet. Den nominella spänningen för de använda varistorerna 
är 275 V. Andra skyddselement som används i apparater är transil- och zenerdioder, som eliminerar 
överspänningspulser och installeras i apparatens matnings- och ingångskretsar (till exempel 
vid inkoppling av induktiva belastningar). Vid inkoppling av belastningar med induktiv karaktär 
rekommenderas du att separera matningen av utgångselement (motorer, kontaktorer) från apparatens 
spänningsmatning/styringång.

2) Driftförhållanden

Vid installation av apparaten är det nödvändigt att ta hänsyn till temperaturen för omgivande 
apparater så att den arbetstemperatur som anges i de tekniska parametrarna bibehålls. För 
att apparatens angivna brukbarhetstid skall gälla och för att apparaten skall fungera korrekt 
rekommenderas du att inte utsätta apparaten för extrem påverkan som kan göra att apparaten inte 
fungerar korrekt (aggressiva ångor, kemikalier, relativ luftfuktighet över 95 %, starka elektromagnetiska 

1) Protection of the Device

The device contains protections against over-voltage peaks, and disturbing pulses in the main. To 
ensure correct function of these protective elements, suitable protections of higher degree (VDE group 
A,B,C respectively IEC I, II) must be mounted into the installation. The device must be protected 
before overloads and short circuit, which can damage output of device. Device is equipped by 
protective element (varistor) against possible over-voltage in the main. The nominal voltage of the 
appliedvaristors is 275V. Other protective elements that are usedin devices are transils and zener 
diodes, that eliminate over-voltage pulses, and are installed in supply and input circuits of the device 
(for example when switching inductive loads). In case of switching loads of inductive character it is 
recommended to separate supply of output elements (motors, contactors) from device voltage supply/
control input of the device.

2) Operating Conditions

While installing this device it is necessary to consider temperature rate of ambient devices so the 
operation temperature stated in technical parameters is kept. To ensure the statedoperating life 
andcorrect function of the device, it is not recommended to expose these to other extreme influences 
that can negatively effect correct function of the device (aggressive evaporations, chemicals, high 
relative humidity above 95%, strong electromagnetic field of microwave radiation). Product is in 
compliance with requirements of EMC (electromagnetic immunity and resistance) andin accordance 

Reviews: