Universal dimmer actuators GDA2K-400 KNX / GDA4K-400 KNX
pdated: Mai-17 (Subject to changes) Page 22 of 63
3.3.3 Channel C1/C2: Configuration options
Table 9
Designation
Values
Description
Copy main parameters from
channel C1
This parameter is only available
for C2 (C4).
no
C1 (C3) and C2 (C4) can be
configured completely separately
from one another.
yes
C2 (C4) is operated
automatically with the same
settings as C1 (C3).
Only force, scenes, hour counter
and diagnostic messages remain
individually configurable for C2
(C4).
yes, channel C2 (C4) boosts
channel C1 (C3)
Channel C2 (C4) is wired in
parallel with C1 (C3) and serves
only as an output amplifier.
In this mode, up to 4 booster
modules can be connected in
parallel and a dimming output of
up to
2000 W achieved
Adjust dimming value limits
no
The standard values apply:
Implement limit when executing
the object
= no
Limit applies for:
- Soft switching,
- absolute dimming,
- relative dimming,
- switch command
=
no
yes..
The page
Dimming value
restrictions
will be shown and all
parameters can be adjusted
individually.
7
dimming outputs > 1000 W for professional use only.
