manualshive.com logo in svg

GARNI GARNI 570 EASY II, Instruction Manual, Page: 6 / 11

Share
Download
GARNI GARNI 570 EASY II Instruction Manual Download Page 6

6 

Setting a 12 or 24 hour time display 

To select the time display in 12-hour or 24-hour format, press the 

DOWN 

button in basic view mode.

 

If the 

12-hour format is selected, the PM indicator will be displayed next to the time from 12:00 p.m. until 11:59 
p.m. 

Temperature units 

To select the display of the measured temperature in degrees 

Celsius °C or Fahrenheit °F, press the 

UP

 

button in basic view mode.

 

Barometric pressure units 

To select the barometric pressure display in hPa or mmHg, press the 

UP 

button in the basic view mode and 

hold for 3 seconds

. 

Switching between wireless sensor channels 

If multiple wireless sensors are paired with the main unit, press the 

CHANNEL

 button to display the 

measured temperature and relative humidity values of individual wireless sensors. 
If a double circular arrow is displayed, the measured values of all connected wireless sensors will gradually 
be displayed on the main unit display. 

Display backlight 

The main unit allows you to adjust the display backlight intensity. To adjust it, press the 

SNOOZE/LIGHT 

button in the basic display mode.  
The display backlight has two levels of brightness and a turn-off option.  
Only short-time backlighting for 8 s and two levels of brightness can be used with battery power. The main 
unit is equipped with a sound sensor, and when powered by batteries only, the display can be illuminated 
by sound, for example, tapping, clapping, etc. 

Setting the alarm time 

The weather station has the option to set two alarm times. In the basic display, select alarm time 1 by 
pressing the 

MODE 

button

 

(AL 1, default setting at 6:00 a.m.) or alarm time 2 (AL 2, default setting 0:00 

a.m.). Then press the 

MODE

 button again

 

and hold for 3 seconds. The hour digits begin to flash.

Use the 

UP 

or 

DOWN

 buttons to set the desired alarm hour and confirm by pressing 

MODE

. 

The minute digits begin to flash. Use the 

UP

 or 

DOWN

 buttons to set the desired alarm minute. 

Confirm the settings by pressing 

MODE

. 

If no button is pressed for 8 s during setup, the display will change to the basic display. 

Snooze function 

When the alarm signal is activated at the set time, press the 

SNOOZE/LIGHT

 button to interrupt and 

postpone the alarm to a later time. The snooze time can be set from 3 to 20 minutes. Default setting  
is 5 minutes. 
To set the snooze time, press 

SNOOZE/LIGHT 

and hold for 3 s. The Zz symbol will appear in place of the 

time display, and the digit 05 (the default 5-minute snooze setting) will flash. 
Use the 

UP

 or 

DOWN

 buttons to set the desired snooze minute in the range of 3  

to 20 minutes and confirm the settings by pressing 

MODE

. 

If no button is pressed for 8 s during setup, the display will change to the basic display. 

Turn on the alarm clock 

In the basic display mode, press 

ALARM

.  Press one time to turn on alarm clock1, twice 

to turn on alarm clock 2, three times to turn on alarm clocks 1 and 2, and switch off the alarm clock by 
pressing the fourth time. Icons for respective alarms AL1 and AL2 are always shown on the display 

Summary of Contents for GARNI 570 EASY II












Reviews:

No comments