5
The signal range may be affected by obstacles (walls, trees) and other electrical devices (TVs, monitors,
etc.).
Time controlled by the DCF-77 radio signal
The weather station is equipped with the DCF-77 time/date control signal receiver, the signal is
broadcasted by a transmitter from Frankfurt am Main, Germany, with a range of about 1500 km. When
outside this range, the time and date can be adjusted manually. The time and date are adjusted every day.
When the AC adaptor connector is connected to the main unit, the display lights up, all display segments
are briefly displayed, and a beep sounds and the wireless sensor signal reception commences.
After the connection with the wireless sensor has been established, the reception of the DCF-77 is
commenced, indicated by flashing icon
. This process may take several minutes. The display will be off
during the reception of the DCF-77 signal and the functionality of the main unit will be limited. Only the
touch button
will function. To terminate the DCF-77 signal reception, press the
–
button and hold
for 2 seconds.
When the signal is received successfully, the display shows the current time, date and signal reception icon.
The icon
shows the signal reception strength, the more bars the better the signal. The weather station
will automatically receive the DCF-77 signal for time adjustment every day at 1:00, 2:00 and 3:00. If the
reception is unsuccessful, it will be attempted again in another hour, five times in total. The received time is
compared with the time on the main unit and adjusted if necessary. For better signal reception, place the
main unit near a window.
If the DCF-77 signal is not received (icon
is not displayed), reception will be interrupted, and it will be re-
attempted in an hour until the DCF-77 signal is received successfully.
Note:
The received DCF-77 time adjustment signal strength may be affected by the geographical location or the
premises where the weather station is located.
For better reception, the main unit should be placed on a flat non-metallic surface, near a window on the
upper floor of your house away from electrical appliances such as a TV, computer, etc.
Manual reception of the DCF-77 signal
Press buttons
+
and
–
simultaneously. The display backlight is turned off, icon
flashes and a search for
DCF-77 is started manually. If the reception is unsuccessful, the icon disappears, and the time is not
adjusted automatically. After the signal is received successfully, the icon
is displayed, time and date are
adjusted, even if they were manually set before.
To terminate the DCF-77 signal reception, press the
–
button and hold for 2 seconds.
No data on display
Reception of the DCF-77 signal not successful
1.
Check that the DCF-77 is available at your location.
2.
Start searching for the signal manually.
3.
Wait until the main unit automatically restarts the search.
4.
Set time and date manually.
Wireless sensor signal reception not successful
1.
Check that the batteries in the wireless sensor are inserted correctly.
2.
Check that the wireless sensor is within the signal range.
3.
Press and hold button
+
to start signal search manually.