Page 6
SeeLeveL Sender Installation Manual 710-JS / 710-ES / 710-SS
PROGRAMMING THE SENDERS 710-ES AND 710-SS
FRESH
Senders tabs to cut for single sender or bottom sender if double-stacked.
GREY
GRY
BLACK
BLK
For a double-stacked tank configuration, the top sender requires an additional tab to be cut.
GALLEY
GRY
TOP
FRESH TOP
GREY TOP
GRY
BLACK TOP
BLK
TOP
TOP
TOP
Examples for correcting cuts made in error.
FRESH TOP
TOP
(GRY or BLK tab cut by mistake)
GRY
BLK
GREY SINGLE
OR BOTTOM
BLK
(BLK tab cut by mistake)
FRESH SINGLE
OR BOTTOM
TOP
(TOP tab cut by mistake)
No Tabs cut
W
CAUTION:
TABS CUT IN ERROR
If the “GRY” tab has been removed and it should be a black
tank sender, or if the “BLK” tab has been removed and it should
be a grey tank sender, then cut out the recessed grey-black
correction tab that says “GBC” next to it. This reverses the effect
of the grey and black tabs.
If either the “GRY” or “BLK” tabs have been removed and it
should be for a fresh tank, then remove the other “GRY” or
“BLK” tab. When both the “GRY” and “BLK” tabs are removed, it
becomes a fresh tank sender.
W
NOTE: For systems that have a
Galley button.
Cut the GRY and the TOP
tabs. The GALLEY and the GREY tanks can
only have one sender, so no programming
is possible for the number of senders.
