background image

Page 12

688 Manual 

CHAPTER 5 - SERVICE AND WARRANTY INFORMATION

T

he warranty will only apply if the warranty has been registered online from the Garnet 

Instruments registration web page.  

DISCLAIMER OF WARRANTY ON HARDWARE

Garnet Instruments warrants equipment manufactured by Garnet to be free from defects in 
material and workmanship under normal use and service for a period of one year from the date 
of sale from Garnet or an Authorized Dealer.  The warranty period will start from the date of 
purchase or installation as indicated on the warranty card.  Under these warranties, Garnet shall 

be responsible only for actual loss or damage suff ered and then only to the extent of Garnet’s 

invoiced price of the product.  Garnet shall not be liable in any case for labor charges for indirect, 
special, or consequential damages.  Garnet shall not be liable in any case for the removal and/or 
reinstallation of defective Garnet equipment.  These warranties shall not apply to any defects or 
other damages to any Garnet equipment that has been altered or tampered with by anyone other 
than Garnet factory representatives.  In all cases, Garnet will warrant only Garnet products which 

are being used for applications acceptable to Garnet and within the technical specifi cations of the 

particular product.  In addition, Garnet will warrant only those products which have been installed 

and maintained according to Garnet factory specifi cations.

LIMITATION ON WARRANTIES

These warranties are the only warranties, expressed or implied, upon which products are sold by 

Garnet and Garnet makes no warranty of merchantability or fi tness for any particular purpose in 

respect to the products sold.  Garnet products or parts thereof assumed to be defective by the 
purchaser within the stipulated warranty period should be returned to the seller, local distributor, 
or directly to Garnet for evaluation and service.  Whenever direct factory evaluation, service or 

replacement is necessary, the customer must fi rst, by either letter or phone, obtain a Returned 
Material  Authorization  (RMA)  from  Garnet  Instruments  directly.    No  material  may  be  returned 

to Garnet without an RMA number assigned to it or without proper factory authorization.  Any 
returns must be returned freight prepaid to: Garnet Instruments, 286 Kaska Road, Sherwood Park, 
Alberta, T8A 4G7.  Returned warranted items will be repaired or replaced at the discretion of Garnet 
Instruments.  Any Garnet items under the Garnet Warranty Policy that are deemed irreparable by 
Garnet Instruments will be replaced at no charge or a credit will be issued for that item subject to 
the customer’s request.

If you do have a warranty claim or if the equipment needs to be serviced, contact the installation 
dealer.  If you do need to contact Garnet, we can be reached as follows:

CANADA 

UNITED STATES

Garnet Instruments 

Garnet US Inc.

286 Kaska Road 

5360 Granbury Road

Sherwood Park, AB  T8A 4G7 

Granbury, TX  76049

CANADA   

USA

email:  [email protected] 

email:  [email protected]

Go online t

seelevelsupport.com/

 and select “Register Warranty”.

Summary of Contents for MULTIRACK 688-D















Reviews: