Garmin Zumo 590, Owner'S Manual

Page: 19 / 26

3
Select an item in the list.
4
If there is more than one incident, use the arrows to view
additional incidents.
Viewing a Traffic Incident on the Map
1
From the traffic map, select .
2
Select an incident.
Understanding Traffic Data
The traffic legend explains the icons and colors used on the
traffic map.
1
From the map, select > Traffic .
2
Select Legend .
About Traffic Cameras
Traffic cameras provide live images of traffic conditions on
major roadways and intersections. You can save cameras that
you want to view regularly.
Saving a Traffic Camera
Before you can use this feature, you must subscribe to the
photoLive service, and your device must be connected to a
supported phone running Smartphone Link ( Smartphone Link ).
This feature is not available in all areas.
1
Select Apps > photoLive .
2
Select Touch to Add .
3
Select a road.
4
Select an intersection.
5
Select Save .
Viewing a Traffic Camera
Before you can view a traffic camera, you must save a traffic
camera ( Saving a Traffic Camera ).
1 Select Apps > photoLive .
2 Select a camera.
trafficTrends™
When the trafficTrends feature is enabled, your device uses
historic traffic data to calculate more-efficient routes.
NOTE: Different routes may be calculated based on traffic
trends for the day of the week or the time of day.
Disabling trafficTrends
To prevent your device from recording or sharing traffic data,
you must disable trafficTrends.
Select Settings > Traffic > trafficTrends .
Enabling Traffic
You can enable or disable traffic data. When traffic data is
disabled, the device does not receive traffic data, but it still
avoids potentially congested areas in routes using the
trafficTrends feature, if enabled ( trafficTrends™ ).
1
Select Settings > Traffic .
2
Select the Traffic check box.
Data Management
Data Management
You can store files on your device. The device has a memory
card slot for additional data storage.
NOTE: The device is not compatible with Windows 95, 98, Me,
Windows NT®, and Mac OS 10.3 and earlier.
File Types
The device supports these file types.
• Maps and GPX waypoint files from myGarmin™ mapping
software, including MapSource® and BaseCamp™ ( Custom
Points of Interest ).
• GPI custom POI files from Garmin POI Loader ( Installing POI
Loader ).
• MP3 audio files.
About Memory Cards
You can purchase memory cards from an electronics supplier,
or purchase pre-loaded Garmin mapping software
( www.garmin.com ). In addition to map and data storage, the
memory card can be used to store files such as maps, images,
geocaches, routes, waypoints, and custom POIs.
Installing a Memory Card
NOTE: The device supports microSD, microSDHC, and
microSDXC memory cards. It does not support exFAT. Memory
cards must be formatted as FAT32.
1
Remove the back cover and the battery from the device.
2
Insert a memory card into the slot on the device.
3
Press it in until it clicks.
Connecting the Device to Your Computer
You can connect the device to your computer using a USB
cable.
1
Plug the small end of the USB cable into the port on the
device.
2 Plug the larger end of the USB cable into a port on your
computer.
A picture of your device connected to a computer appears on
the device screen.
Depending on your computer operating system, the device
appears as either a portable device, a removable drive, or a
removable volume.
Transferring Data From Your Computer
1 Connect the device to your computer ( Connecting the Device
to Your Computer ).
Depending on your computer operating system, the device
appears as either a portable device, a removable drive, or a
removable volume.
2 On your computer, open the file browser.
3
Select a file.
4
Select Edit > Copy .
5
Browse to a folder on the device.
NOTE: For a removable drive or volume, you should not
place files in the Garmin folder.
6
Select Edit > Paste .
Disconnecting the USB Cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not
necessary to safely disconnect.
1
Complete an action:
• For Windows computers, select the
Safely Remove
Hardware icon in the system tray, and select your device.
• For Mac computers, drag the volume icon to the trash.
2 Disconnect the cable from your computer.
Data Management 15