About the Step Goal
Your device has a default goal of 5,000 steps per day. As you
begin your activity, the device records your progress toward the
daily goal.
You can turn on the auto goal feature or set a personalized step
goal using your Garmin Connect account. When you turn on the
auto goal feature, the device creates a daily step goal
automatically, based on your previous activity levels.
History
Your device keeps track of your daily steps, distance traveled,
calories burned, and intensity. This history can be sent to the
Garmin Connect Mobile app, the Garmin Connect site, or your
wellness partner site.
Your device stores your activity data for up to 30 days. When
the data storage is full, the device deletes the oldest files to
make room for new data.
Sending Data to Your Garmin Connect Account and
Your Wellness Partner Site
You can view and analyze data from your vívokí device on the
Garmin Connect Mobile app, the Garmin Connect site, or your
wellness partner site. You can use the vívohub
™
receiver or the
Garmin Connect Mobile app to send your data.
• Send data automatically by passing within range of a vívohub
receiver.
NOTE:
For information about the vívohub receiver, contact
your wellness program administrator.
• Send data by synchronizing the vívokí device with the
Garmin Connect Mobile app (
).
If you received and registered your device with a wellness
program, your data will be sent automatically to your wellness
partner site.
NOTE:
Garmin
®
recommends that you carefully read the terms
and privacy policy of your wellness program.
Device Information
vívokí Specifications
Battery type
User-replaceable CR2032 (3 volts)
Battery life
Up to 6 months (typical use)
Operating temperature
range
-10°C to 50°C (from 14°F to 122°F)
Radio frequency/protocol 2.4 GHz ANT
®
wireless communications
protocol
Bluetooth Smart wireless technology
Water rating
1 ATM*
*The device withstands pressure equivalent to a depth of 10 m.
For more information, go to
Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Replacing the Battery
WARNING
Do not use a sharp object to remove batteries.
Keep the battery away from children.
Never put batteries in mouth. If swallowed, contact your
physician or local poison control center.
Replaceable coin cell batteries may contain perchlorate
material. Special handling may apply. See
CAUTION
Contact your local waste disposal department to properly
recycle the batteries.
Before you can replace the battery, you must remove the
silicone clip.
1
Locate the circular battery cover
À
on the back of the sensor.
2
Twist the cover counter-clockwise until it is loose enough to
remove.
3
Remove the cover and the battery
Á
.
TIP:
You can use a piece of tape
Â
or a magnet to remove
the battery from the cover.
4
Wait 30 seconds.
5
Insert the new battery into the cover, observing polarity.
NOTE:
Do not damage or lose the O-ring gasket.
6
Replace the cover by aligning the dots and rotating
clockwise.
TIP:
To confirm proper battery replacement, tap the device
until the LEDs flash.
Appendix
Software License Agreement
BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE
TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE
LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT
CAREFULLY.
2
