Garmin STRIKER Series, Owner'S Manual, Page: 7 / 16

Å
Logs
Æ
Distance from the side of the vessel
Ç
Water between the vessel and the bottom
Split-Screen Frequency
You can view two frequencies from the split frequency screen.
Flasher
The flasher shows sonar information on a circular depth scale,
indicating what is beneath your boat. It is organized as a ring
that starts at the top and progresses clockwise. Depth is
indicated by the scale inside the ring. Sonar information flashes
on the ring when it is received at the depth indicated. The colors
indicate different strengths of the sonar return.
Select Flasher.
À
Depth at your present location
Á
Depth scale
Split-Zoom View
On the split-zoom page, you can see a full-view graph of sonar
readings on the right side of the screen, and a magnified portion
of that graph on the left side of the screen.
From a sonar screen, select
> Split Zoom .
À
Zoomed depth scale
Á
Zoom window
Â
Depth range
Selecting the Transducer Type
If you are not using the included transducer, you must set the
transducer type to enable the sonar to function optimally. If you
are using the included transducer, you do not need to complete
these steps.
1
Select Settings > My Vessel > Transducer Type .
2
Select the type of transducer you are using.
Creating a Waypoint on the Sonar Screen
Using Your Present Location
1
From a sonar view, select .
2
If necessary, edit the waypoint information.
Pausing the Sonar
Not all options are available on all models.
Select an option:
• From the
Traditional or DownVü sonar screen, select or
.
• From the SideVü sonar screen, select or .
Creating a Waypoint on the Sonar Screen
Using a Different Location
1
From a sonar view, pause the sonar.
2
Select a location.
3
Select .
4
If necessary, edit the waypoint information.
Overlay Number Settings
You can customize the data shown on the sonar screen.
NOTE: Not all features are available on all devices.
From a sonar screen, select > Overlay Numbers .
Navigation Inset : Shows the navigation inset when the vessel
is navigating to a destination.
Device Voltage : Shows the voltage of the device.
Speed : Shows the vessel's current speed.
Time of Day : Shows the current time of day.
Compass Tape : Shows the compass tape data bar.
Depth : Shows the transducer's current depth.
Water Temp. : Shows the current water temperature.
Sonar Gain and Noise Settings
You can adjust the amount of gain and noise on a sonar screen.
The gain setting controls the sensitivity of the sonar receiver to
compensate for water depth and water clarity. Increasing the
gain shows more detail, and decreasing the gain reduces screen
clutter.
NOTE: Setting the gain on one page applies the setting to all the
pages.
Setting the Gain Manually
1
From a sonar screen, select > Gain .
2
Select or until you begin to see noise in the water portion
of the screen.
3
Select or to decrease the gain.
Setting the Gain Automatically
NOTE: To set the gain on the split-frequency screen, you must
set each frequency separately.
1
Select > Gain .
2
Select Enable Auto Gain , if applicable.
3
Select an option:
• To display higher-sensitivity, weaker sonar returns with
more noise automatically, select Auto High .
• To display medium-sensitivity sonar returns with moderate
noise automatically, select Auto Med .
Sonar 3